Printed from: Quest Integrity

Print Page


The Signal

What types of measurements are required for a Level 2 pitting assessment?
(scroll down for answer)

Quiz Answer:

Pit depth, diameter, pit couple spacing, relative angle between pits.

November 2013

Did you know?
Assess pitting corrosion in a snap with Signal FFS

Pitting corrosion is found on many types of equipment for a variety of reasons, and can occur on the inside or outside surface of a component. Evaluating the pitting for fitness-for-service can be quite a task if it must be done manually. For a Level 1 assessment, collecting the data is as simple as taking some photographs and measuring pit depths. The assessment is even simpler — just match the pit chart with the photograph and use Signal to run the calculations. A Level 2 pitting assessment requires more data collection and data entry, however using Signal makes completing the assessment an easy task.

Like us on FacebookFollow us on TwitterView our profile on LinkedInView our videos on YouTube

Copyright © 2013. All Rights Reserved.

All Content Rights Reserved , Quest Integrity
Captavi - SaaS CMS Platform ©