Overcoming Heavy Bore RestrictionsBy: Lilly Darnell, Senior Marketing Specialist
As seen in the September 2013 issue of Pipelines International - download the PDF version.
Project OverviewThe Pipeline Projects Department at a major oil transportation company in Canada planned to inspect a 6-inch sour gas pipeline with conventional in-line inspection (ILI) methods; however, it was determined that conventional ILI methods were not a viable option due to heavy tool damage on gauge pig runs. Some of the pipeline conditions were unknown to the client due to acquisition of the line from another company. The Projects Engineer believed there was a high probability of a significant dent in the pipeline, and that it would be necessary to excavate and make modifications to the line in order to complete an in-line inspection.
SolutionThe client contacted Quest Integrity Group to inspect the line using InVista™, an ultrasonic ILI tool for difficult-to-inspect and unpiggable pipelines. Because of the tool’s large collapse factor, it successfully navigated this sour gas line despite heavy bore restrictions. The InVista tool captured 100% of the interior and exterior pipeline data and Quest Integrity provided the client with a complete data set for the line including wall thickness changes, bend locations and inner radius profile within 30 days.
ChallengesInVista identified 5 wall thickness changes in one 20-foot section of the pipeline. These changes ranged from 0.864 inches (21.95 mm) to 0.265 inches (7.1 mm). In addition, the tool successfully navigated and inspected the two joints present in this section. It was noted these joints accounted for the tool damage that occurred on previous gauge tool runs instead of a significant dent.
ResultsA full API 579-1 / ASME FFS- 1 2007 Fitness-for-Service assessment was conducted utilizing the high-quality inspection data provided by the InVista tool. The data was analyzed for wall thinning and anomalies such as corrosion, denting and ovality using LifeQuest™ Pipeline software. The Remaining Strength Factor (RSF) and Reduced Maximum Allowable Operating Pressure (MAOPr) were also determined for the line. Below is an inspection summary:
- 130 external metal loss anomalies were individually identified.
- Wall loss at 58.0% was identified in one section of the pipeline.
Figure 1. External metal loss identified.
Figure 2. Wall loss percentage identified.
BenefitsThe client did not have to excavate or make any line modifications in order to complete the inspection, saving time and money. The inspection and assessment pinpointed specific areas of degradation, allowing the client to make the necessary repairs and return the line to service quickly. In addition, InVista confirmed the cause of the gauge tool damage. The Projects Engineer was very pleased with how quickly Quest Integrity executed the project and delivered the data, allowing them to make confident, timely decisions for the pipeline.