
Articles
Engineering and Consulting Technical Papers
Learn about Quest Integrity's engineering and consulting technology developments and solutions by clicking on the links to relevant technical papers below.
Engineering Consulting
- Effect of Residual Forming Stresses on Fracture in ERW Pipe
- Recent Innovations in Pipeline Seam Weld Integrity Assessment
- Creep Life Simulation and Assessment of High Temperature Piping Systems and Components
- Fitness-For-Service Assessment on 1940's Era Wicket Gates
- Engineering Assessment of Deformed Spillway Gate
Fracture Mechanics and FEACrack
- Consideration of Reduction in Stiffness due to Cracking and the Impact on Standard Stress Intensity Factor Solutions
- Cylinder Axial Crack Reference Stress Comparison Using Elastic-Plastic FEA 3D Crack Mesh J-Integral Values
- Computational Fluid Dynamics (CFD) Provides Alternative to Conventional Heat Treatment Guidelines
- Fatigue Crack Propagation Comparison of a Hydropower Main Inlet Valve Using 3D Crack Meshes in a Full Model Versus a Sub-Model
- A Finite Element Procedure to Model the Effect of Hydrostatic Testing on Subsequent Fatigue Crack Growth
- Ductile Tearing Instability Assessment of a Cracked Reactor Pressure Vessel Nozzle for Larger Critical Crack Size Compared to the FAD Method
- Crack Front Stress Intensity Validation in a Nozzle Component
- Ductile Tearing Analysis of a Custom Pipe to Flange Nozzle Using 3D Crack Meshes
- Comparison Between Ductile Tearing Analysis and Linear Elastic Fracture Mechanics Analysis
- Using the Failure Assessment Diagram Method with Fatigue Crack Growth to Determine Leak-before-Rupture
- Examination of Non-Intuitive Stress Intensity Solution Trends for Thick-Wall Cylinder Internal Cracks from ASME STP-PT-072
- Leak-Before-Break Assessment of a Cracked Reactor Vessel Nozzle Using 3D Crack Meshes
- Steam Turbine Critical Crack Evaluation and Ranking Cracks to Prioritize Inspection
- Adjusted J-R Toughness Curve for Pipes Using J-A2 Crack Constraint of CT Specimens and 3D Crack Meshes
- Ductile Tearing Instability Analysis of Piping Bend with Surface Cracks Using J-R Resistance Curve and 3D Crack Meshes in Elastic-Plastic FEA
- Evaluation of Interaction Behavior of Stacked Crack-Like Features